赐来福AC6型自动络筒机使用问题及故障排除 - 各期目次 - 中国纺织器材信息网

赐来福AC6型自动络筒机使用问题及故障排除
2017-12-06 16:38:08   来源:   评论:0 点击:

为了解决赐来福AC6型自动络筒机纺纯亚麻品种时,在循环(打结)部分、捻接器和机器元件方面出现的问题,结合生产实际和维修经验,详细分析问题产生的原因、表现的状态及解决方法。指出:
卢  刚
(滨州愉悦家纺有限公司,山东 滨州  256623)
 
摘要:为了解决赐来福AC6型自动络筒机纺纯亚麻品种时,在循环(打结)部分、捻接器和机器元件方面出现的问题,结合生产实际和维修经验,详细分析问题产生的原因、表现的状态及解决方法。指出:单锭捻接成功后出现“CY60”“CY25”故障代码是设备系统问题,需操作工手动解决,彻底的解决方案是联系制造厂家对相应程序做修改;接头出现两端有“小尾巴”和“小毛刺”是压簧弹性衰退导致,可用压缩空气气管替代压簧;右张力盘磨灭是压簧断裂脱落所致,可在张力盘上方、纱线导引口的下方加装导引瓷片解决;因小吸嘴扭簧易位而引发小吸嘴抓取下纱失误率高的问题,可利用电线外皮将两个扭簧进行组合来解决;因操作工非正规操作而引发小吸嘴抓取下纱失误率高的问题,可采用专用工具对小吸嘴进行处理;此改进同样适用于相同结构的赐来福其他型号自动络筒机。
关键词:自动络筒机;AC6;捻接器;张力装置;张力盘;压簧;弹性衰退;瓷片
中图分类号:TS103.321      文献标志码:B      文章编号:1001-9634(2017)05-0036-04
 
收稿日期:2017-02-12
作者简介:卢  刚 (1980—) 男,山东青岛人,助理工程师,主要从事自动络筒机机电一体化维修工作。
 
Problems and Troubleshooting in Application ofAutomatic Coner AC6 Schlafhorst
LU Gang
(Binzhou Yuyue Home Textiles Co.,Ltd.,Binzhou 256623,China)
 
Abstract:To solve the problems with automatic coner AC6 Schlafhorst in spinning pure flax varieties such as problems in knotting,splicing and machine parts,considering the actual production and maintenance experience,detailed analysis is done to the causes,status and solutions to the problems.It is pointed out that when fault codes“CY60”“CY25”come alarming after single spindle splicing,it indicates that there will be a problem with equipment system,which should be manually removed by the operator.To solve the problem once and for all is to ask the enterprise for modification of the procedure.When a“tail”or“small burr”come being with joints at both ends,it indicates that there is failure with pressure spring,and compressed air pipe can be used instead.The failure with right tension disc results from breakage of the pressure spring,a ceramics disc can be installed above the tension disc and below the yarn guide.As to the repeated failure in grabbing yarn because of the suction pipe due to the torsion spring’s translocation,the two torsional springs can be binded by the wire sheath whereas the repeated failure in grabbing yarn because of the operators’ informal operation,something can be done to the small suction mouth using special tools.This solution is applicable in the automatic coner of the same structure with tension disc and pressure spring of splicers.
Key Words:automatic coner;AC6;splicer;tension device;tension disc;pressure spring;elastic failure;ceramics
 
参考文献:
[1] Saurer Schlafhorst AG&Co.Autoconer 6 Operation Manual Model“RM”(Chinese)[Z].
[2] Saurer Schlafhorst AG&Co.Autoconer 6 Service Manual Model“RM”(Chinese)[Z].
 

相关热词搜索:来福 自动络筒机 故障

上一篇:村田No.7-II型自动络筒机生产T/R(S)捻品种实践
下一篇:短流程清梳联设计实践

分享到: 收藏
评论排行
 广西快3 极速赛车计算公式 爱购彩票计划群 极速赛车冠军公式 58彩票网计划群 吉林快3 极速赛车登陆 极速赛车是哪里开的 凤凰娱乐彩票计划群 广西快3开奖